How to troubleshoot minor faults of cam divider

　　The cam divider is a mechanism that realizes intermittent motion. It has high indexing accuracy, stable operation, large transmission torque, self-locking during positioning, compact structure, small size, low noise, good high-speed performance, and long life. So how to troubleshoot the cam splitter, the following editor will introduce you:

　　 1. In terms of transmission components, gears, pulleys, etc. are loose. This situation will cause the cam divider to operate unstable and shake. Don't worry if you encounter this situation. For these problems, you only need to adjust and fix the gears and pulleys, and keep the two synchronous wheels and two gears on the same plane.

　　 2. Excessive or insufficient tension of belts and chains will cause unstable rotation of the input drive system of the cam divider. Reason analysis: the concentricity is not enough, the distance between the two gears is large or small, and the flatness is not in place. Solution: Adjust the position of the gear, including concentricity, distance, and the same plane. After adjustment, fix it with screws.

　　3. The flatness of the disk surface of the output shaft is not enough or the positioning and correction of the station is poor, and the disk surface is bent, deformed, or out of center. This requires the disc surface material and thickness to meet the requirements, and the starting position of the cam divider should be aligned.